Search — jetson

A Jetson AGX Orin report indicates ISP1 fails to power on at boot. This prevents expected camera/ISP functionality from being available after startup.

A user reports two cameras on Jetson Orin Nano are not working. No further diagnostic information is included.

A Jetson AGX Orin Developer Kit is reported completely dead with no power response. No additional context is provided.

A user cannot download/install PyTorch with CUDA support on Jetson Orin NX (JetPack 6.0) due to network issues. This blocks setting up a CUDA-enabled ML stack on device.

A USB microphone reportedly cannot record properly on the Jetson Thor platform. No additional details are provided in the post.

A user reports random PCIe signals between an SBC and an NVMe device. The post contains no additional diagnostic content.

A user reports a Tegraparser_v2 problem. No further details are included in the issue body.

When using a GMSL camera, image acquisition may fail midway. No additional details are provided.

Jetson Orin NX Super 16GB reportedly does not power on after reverse polarity, with suspected component damage (D65/Q25). This blocks device operation.

A user reports a CAN0 data bitrate issue. No additional details are provided in the post.

A user reports an EEPROM error on AGX T5000. No additional context is provided.

A new sensor capture image reportedly fails with Jetson Linux 36.3.0. This indicates a capture pipeline problem on that release.

A user reports a Jetson Orin Nano booting issue. No further details are included.

Orin Nano Super Dev Kit shows an MSS SDRAM init failure (err 0x48480112) though the module was previously functional. This prevents the system from booting normally.

A user requests a PVA SDK developer application. No additional details are provided in the post.

A user requests DRAM supplier consistency (Hynix) for Orin NX 16GB. This indicates concerns about BOM variability impacting deployments.

A user asks about carrier-board PCIe. The post has no additional details.

A user asks about connecting MGBE to an ethernet RJ45. No further information is included.

User asks how to display DDR memory information such as manufacturer. This is a diagnostics/visibility request.

User reports that mmapi encoder dequeue capture is not blocked. This suggests unexpected non-blocking behavior in the encoder pipeline.

A USB 3.0 device is recognized as a USB 2.0 device. This reduces bandwidth and can break high-throughput peripherals.

Jetson ORIN is reported as not coming out of recovery. This blocks normal boot and device provisioning.

On AGX Thor / JetPack 7.1, UEFI leaves DCE mailbox state dirty, causing RmInitAdapter failure on specific units. This can prevent GPU driver initialization and system usability.

User reports Orin NX 16G boot failed. This prevents use of the module/device.

User reports a first boot issue with Jetson Orin Nano dev kit. This blocks initial setup.